Walk through the desired area you wish to place the flex-wall picking up any debris. You may use a shovel to flatten uneven areas.
If needed, pick up your first piece of flex-wall and bend or flex it to have the desired curve.
Place On Path
Place first piece at desired area. Add additional pieces in path, shaping if desired.
Remove taped cap from top of flex-wall exposing the recessed area. Insert landscape spike into the recessed area. You may have to give a firm push to connect the pieces. Follow this step until all pieces are connected if needed.
Note: You may adjust the flex-wall before moving to the next step.
Once flex-wall is in desired area, hammer spikes into the ground securing it in place.
Put Caps in
Caps are designed to match the proper stone. Position the cap onto recessed area along top of flex-wall, rotating if necessary to match the contour of the stone. Once cap is in the correct position, secure by tapping with a hammer.
Note: Numbers are located on the bottom of the cap and in the recessed area.